Muktinath to Tatopani on the Annapurna Circuit covers 4 stages, via Jomsom, Marpha and Tukuche. It goes from about 3,760 m to about 1,190 m, a net descent of roughly 2,570 m. Timing depends on road and multi-day sections, so use the stage list.
Quick facts
- Start: Muktinath, about 3,760 m
- End: Tatopani, about 1,190 m
- Change: a net descent of roughly 2,570 m
- Stages: 4
- Total time: varies, see the stage list
- Hardest stage: moderate
Stage by stage
- Muktinath to Jomsom: 6 to 8 hours on foot, or 2 to 3 hours by jeep (moderate)
- Jomsom to Marpha: 1.5 to 2 hours (easy)
- Marpha to Tukuche: 1.5 to 2.5 hours (easy)
- Tukuche to Tatopani: About 2 days on foot, or 4 to 5 hours by road (moderate)
How to split it
Some stages are road journeys or multi-day, so treat the stage list below as the guide. The route passes through Jomsom, Marpha and Tukuche. Lodge availability changes by season, so confirm night stops with your operator.
Altitude and health
This route reaches about 3,760 m. Altitude sickness is possible above 3,000 m, so walk slowly, drink water and tell your guide about headaches, nausea or poor sleep. Altitudes vary by a few tens of metres between maps and guidebooks.
Reverse direction
Walking Tatopani to Muktinath is the same route in reverse and means a net climb, so allow more time than the walk down.
Common questions
- How long is Muktinath to Tatopani? The time depends on road and multi-day sections, so check the stage list.
- Which places are on the way from Muktinath to Tatopani? The route passes Jomsom, Marpha and Tukuche.
Plan it
Back to all route information or see the Annapurna Circuit guides.
