The Bhulbhule to Jagat section of the Annapurna Circuit runs from about 840 m to about 1,300 m. Typical time is 6 to 8 hours, rated moderate. That is a net gain of roughly 460 m, with ups and downs.
Quick facts
- Start: Bhulbhule, about 840 m
- End: Jagat, about 1,300 m
- Change: a net gain of roughly 460 m, with ups and downs
- Typical time: 6 to 8 hours
- Difficulty: Moderate
The route
The trail passes Ngadi, Bahundanda and Syange, with terraced fields, waterfalls and long suspension bridges. Jagat sits on a ledge above the river.
Altitude and health
This section stays below about 3,000 m, so altitude sickness is unlikely, though heat, humidity and fatigue still matter. Altitudes vary by a few tens of metres between maps and guidebooks.
Tips
It is a long day on a trail that shares space with a road. Many trekkers take a jeep for part of it.
Common questions
- Is there a road? Yes, much of the route has a road, so you can choose to drive.
- Why is it long? The trail goes up and down along the valley wall, and the road makes some sections dusty.
Reverse direction
Walking Jagat to Bhulbhule is the same trail in reverse. It is usually quicker because it is mostly downhill, but a long descent is hard on the knees, so poles help.
Nearby legs on this route
- Besisahar to Bhulbhule
- Besisahar to Chame
- Besisahar to Manang
- Jagat to Dharapani
- Dharapani to Chame
- Chame to Upper Pisang
Plan it
Back to all route information or see the Annapurna Circuit guides.
